Tips To Secure The Basement Of Your House To Avoid Water Damage

One of the most often and serious reasons of water damage occurs when the moisture reaches the concrete basement of your house and it is a natural process sine soil always has moisture in it. To prevent the breakage of concrete in your basement due to water, the first thing to understand about this material is that it reacts to moisture. The moisture through the concrete creates a chemical reaction that hardens it. Many people believe that once the concrete has a lighter color with a harder surface, it is already dry, but in reality, the cement takes at least seven days to cure and several weeks to dry.

In order for the cement to become strong and to be a wearing surface, cement requires time. The cement needs to be dried at a slow and continuous rate, otherwise, it will shrink and crack. The strength of the cement when accurately cured is between 80 and 100 percent higher than the cement that has not yet been cured. To increase the strength of the cement, the curing process must be stable and continuous. If the cement is very wet, the cracks will certainly develop, causing the issue of water damage in future.

If you are curing cement on a hot sunny day, the chemicals through the cement will stop acting once the moisture has gone, leaving it in the state of weakness. The cement must be protected from damage caused by wind, sun and unstable weather. The ideal temperature to hydrate it is 23 degrees. It is best to keep the temperature as close to that level as possible during the curing process of cement.

See also  An Overview of the Bioclimatic and Industrial Architecture

To keep it moist and to achieve a slow drying process, a membrane can be used. There are different types of membranes on the market, and you will want to make sure that the one you choose is the right one for the type of floor you have.

There is a variety of chemicals and liquid membranes on the market, which are in popularity. You can apply them easily by hand or with a spray applicator. They are classified into four types as chlorinated rubber, resin, water and PVA.

Another way to prevent moisture from evaporating is by using a waterproof paper or plastic film. The plastic films are a simple way to cover the complicated shapes. The plastic films can be quickly removed to allow the curing process to be checked. Another idea is to get an atomizer and spray water on the cement surface before putting the plastic films. Using a spray that emits mist also works very well. Using an absorbing medium such as sand or tarpaulin is also an effective way to maintain the moisture.

To deal with water damage restoration Las Vegas, I would recommend you to hire the experienced team working at waterdamagerestorationlasvegas.net.